Skip to main content

Usevila

Home › Calculators › Electricity Cost Calculator

FREE CALCULATOR

Electricity Cost Calculator

Find out what your appliances cost to run. Add your fans, lights, AC and more, enter your rate per kWh and see your energy use and electricity cost per day, month and year.

Electricity Cost Calculator

Add your appliances, set the electricity rate and see the energy used and the cost per day, month and year.

Your appliances

Your electricity cost will appear here

Check your appliances and the rate, then press Calculate.

What Is an Electricity Cost Calculator?

An electricity cost calculator tells you how much money your appliances use. Every device has a power rating in watts. When it runs for some hours, it uses energy, and the energy is measured in kilowatt hours (kWh). Your electricity company charges a rate for each kWh, so the cost is simply the energy used multiplied by the rate.

This calculator lets you build a list of the appliances in your home. For each one you enter the quantity, the watts and the hours of use a day. It then shows the energy used each day and month, the cost of each appliance, and the full bill with tax. It is a quick way to find out which devices use the most power and where you can save.

How to Use This Electricity Cost Calculator

  1. Pick your country. A typical rate and tax are filled in. Replace them with the rate printed on your own bill for a better estimate.
  2. Check the days in the month. The default is 30 days.
  3. Choose your appliances. Select a device from the list to fill in typical watts and hours, then change the numbers to match your use. You can add as many appliances as you need.
  4. Press Calculate. You see the estimated monthly bill, the energy used and a table that ranks every appliance by cost.

How Electricity Cost Is Calculated

The method has three short steps:

  • Energy a day (kWh) = watts x hours a day x quantity / 1,000
  • Energy a month (kWh) = energy a day x days in the month
  • Cost = energy a month x rate per kWh, plus any tax

For example, a 75 watt ceiling fan that runs 8 hours a day uses 75 x 8 / 1,000 = 0.6 kWh a day, which is 18 kWh in 30 days.

Typical Energy Use of Home Appliances

These are common values for a 30 day month. Real use depends on the model, the age of the device and how you use it.

ApplianceWattsHours a daykWh a daykWh a month
LED bulb1050.051.5
Tube light3650.185.4
Ceiling fan7580.618
Refrigerator (average use)15081.236
TV 55 inch10050.515
Laptop6060.3610.8
Wi-Fi router10240.247.2
Washing machine50010.515
Iron1,0000.50.515
Water heater2,0001260
Air conditioner 1.5 ton1,500812360

A refrigerator is listed at 8 hours because the compressor does not run all day. It switches on and off to keep the temperature.

Electricity Rates Used in the Calculator

The rate per kWh is different in every country and often changes with the amount you use. The calculator starts with a typical household rate, which you should replace with the rate on your own bill.

CountryStarting rate per kWhTax added
BangladeshTk 8.50 (76 to 200 unit slab)5% VAT
IndiaRs 7.00 (typical average, varies by state)None added
UAEAED 0.30 (typical household rate)5% VAT
Saudi ArabiaSAR 0.18 (up to 6,000 kWh a month)15% VAT
United Kingdom27p (typical, includes VAT)None added
United States$0.17 (typical average)None added

In Bangladesh the household tariff from June 2026 is charged in slabs: Tk 4.63 for 0 to 50 units, Tk 5.26 for 0 to 75 units, Tk 8.50 for 76 to 200 units, Tk 9.10 for 201 to 300 units, Tk 9.62 for 301 to 400 units, Tk 15.01 for 401 to 600 units and Tk 17.35 above 600 units. The higher your use, the higher the rate, so enter the rate of your own slab. Check your distributor, because tariffs are revised from time to time.

Electricity Cost Examples

CaseWorkingResult
Ceiling fan, 75 W, 8 hours, Bangladesh18 kWh x Tk 8.50 = Tk 153, plus 5% VATTk 160.65 a month
1.5 ton AC, 1,500 W, 8 hours, India360 kWh x Rs 7Rs 2,520 a month
5 LED bulbs, 10 W, 5 hours, UAE7.5 kWh x AED 0.30 = AED 2.25, plus 5% VATAED 2.36 a month
Refrigerator, 150 W, 8 hours, Saudi Arabia36 kWh x SAR 0.18 = SAR 6.48, plus 15% VATSAR 7.45 a month

Why Your Real Bill May Be Different

Slab and tiered rates. Many countries charge a higher rate as your use grows, so a single average rate is only an estimate.

Fixed charges. Meter rent, demand charges, service fees and surcharges can add to the bill even when you use little power.

Standby power. TVs, chargers, routers and set-top boxes use a small amount of power when they look off.

Real use of motors. Refrigerators, air conditioners and pumps cycle on and off. Their real kWh depends on the weather, the thermostat and the age of the machine.

Wrong watts or hours. Check the label on the device. If you only know the volts and amps, multiply them to get the watts.

Tips to Reduce Your Electricity Bill

Replace old bulbs with LEDs, which use far less power than old filament bulbs. Set the air conditioner to 24 to 26 degrees and clean its filters, because every degree lower raises the bill. Choose appliances with a good energy rating, unplug chargers and devices you do not use, and run washing machines with full loads. Use the table in this calculator to find the biggest users, then start saving with those first.

Frequently Asked Questions

Multiply the watts by the hours of use and divide by 1,000 to get kWh. Then multiply the kWh by your rate per kWh. A 1,000 watt iron used for 1 hour uses 1 kWh, so at a rate of 8 it costs 8.

A kilowatt hour is the energy used by a 1,000 watt device running for one hour. It is the unit that electricity companies use on your bill, and it is also called a unit of electricity.

A 1.5 ton air conditioner uses about 1,500 watts when it is running. If it runs 8 hours a day, that is about 12 kWh a day or 360 kWh in a 30 day month. Multiply by your rate to get the cost. In practice the compressor cycles, so the real use is often lower.

The calculator uses one rate for all units, but real bills often use slabs, fixed charges and surcharges. The watts and hours you enter are also estimates. Use the rate of your own slab and the real hours of use for a closer figure.

Look at the rating label on the back or bottom of the device, or in the manual. It shows the power in watts. If it only shows volts and amps, multiply the two numbers to get the watts.

Household customers pay a rate per unit (kWh) that rises in slabs as monthly use increases, plus 5% VAT and a small meter rent. The slabs are set by the Bangladesh Energy Regulatory Commission and can change, so check your distributor for the current figures.

Switch to LED lighting, use efficient fans and air conditioners, set the thermostat higher, switch off devices you do not use and avoid standby power. Start with the appliances at the top of the results table, because they cost the most.

Note: This calculator gives an estimate based on the rate and use that you enter. Your actual bill depends on your tariff, slabs, taxes and fixed charges, so check your electricity bill for the exact figure.